In order to ensure that the hammer produced by the octagonal hammer manufacturer meets the quality requirements, the temperature must be strictly controlled during the production process.
On the one hand, it is constant temperature, that is, the octagonal hammer and the verification tool must be kept at the same temperature as the verification location before the verification can be performed; on the other hand, the temperature of the verification location must be stable, that is, the temperature change should be strictly controlled during the verification process. Therefore, the humidity requirements for level 00 flat panel verification are added, and the temperature change for level 00 and 0 level panel verification shall not exceed 1 degree Celsius per hour, and the relative humidity shall not exceed the standard regulations. The requirements for temperature and humidity are equally important for sledge hammers and rock slabs. It is necessary to lengthen the time for the calibration tool and the octagonal hammer to equilibrate the temperature, and the regulations also make clear provisions, which will help reduce the deformation of the octagonal hammer to ensure the quality of the calibration.
When using the octagonal hammer, it should be used intermittently, not continuously. The debris on the site and the items that are likely to cause corrosion on the working surface should be removed in time. After the use is completed, the hammer should be wiped in time to keep its surface clean. tidy.
