Like a traditional claw hammer, the hammer head structure is a fork with an opening on one side of the hammer head and a flat top surface without holes on the other side, resulting in a labor-saving claw hammer.
The labor-saving claw hammer also mainly includes a hammer handle and a hammer handle. There is a hammer handle on the front end thread of the hammer handle. One end of the hammer handle is provided with a hammer head. The inner cavity of the hammer head is equipped with a spring. There is an adjustment hole on the upper surface of the hammer handle. , There is a pre-tightening nut in the inner cavity of the adjustment hole, a chute on the side of the hammer handle, a hand push handle is installed at one end of the chute, an iron column is installed in the hammer pair in the inner cavity of the hammer handle, and extends to the top of the hammer handle, by setting a semicircle The head can play a supporting role. When prying iron nails, you can adjust the height of the iron column according to your own needs to make the arm longer and less labor-intensive.
Equipped with a non-slip sleeve to prevent the hammer from falling off and accidentally injuring people, ensuring safe use. By setting the preload nut, the length of the iron pillar can be adjusted and the iron pillar can be fixed.