1. Do not abuse power tools, according to the use and range of appropriate power tools, choose the appropriate design rating of power tools will make you work more efficient and safer.
2. If the switch of the power tool cannot be normally connected or turned off, the power tool cannot be used. Power tools that cannot be controlled by a switch are dangerous and must be repaired.
3. Before making any adjustment, replacing accessories or storing power tools, you must unplug from the power supply or unplug the battery box. This protective measure will reduce the danger of sudden start of power tools.
4. Always keep cutting tools sharp and clean. Do not use cutting tools with cracks, chipped edges and blunted blades, which can cause damage to power tools and personal safety.
5. Use power tools, accessories and tool cutters, etc. considering operating conditions and performing operations in strict accordance with instructions and requirements for the particular type of power tools intended to be used. The use of power tools for operations that do not comply with the requirements may result in hazards.
6. When connecting power, be sure to pay attention to whether the power supply voltage is the same as the voltage marked on the nameplate of the tool. If the power supply voltage is higher than the applicable voltage of the tool, it will cause serious accidents to the user and damage to the tool itself. If the voltage of the power supply cannot be determined, never plug it in casually, and notify a professional electrician for confirmation.
7. At work, don't small talk. Distractions will cause you to lose control.
8. When operating power tools, force should be appropriate. Proper control of the progress, excessive or excessive force will not improve the work efficiency, but will damage the tool and the tool itself.
9. It is strictly prohibited to overload the power tools or do any work outside the function of the tools themselves, which will cause serious damage to the tools themselves.